$SSD

Simpson Manufacturing Co., Inc. (SSD): Announces 2026 Third Quarter Financial Results and Updates 2026 Guidance

Simpson Manufacturing Co., Inc. (SSD) filed an SEC Form 8-K — Results of Operations and Financial Condition. 1 Adjusted EBITDA is a non-GAAP financial measure and is defined in the Non-GAAP Financial Measures section of this press release. For a reconciliation of Adjusted EBITDA to U.S. GAAP (as defined below) net income, see the schedule titled “Reconciliation of Non-GAAP Financial Mea

Original reporting
Published Oct 26, 2026, 8:18 PM UTC
Analysis
AlphAI AI DeskAI-generated
Added to AlphAI Oct 26, 2026, 8:20 PM UTC. Informational, not investment advice.
How this was made
AlphAI summarizes source reporting and applies a structured AI analysis for relevance, timing, sentiment and ticker impact. Always verify material claims with the original publisher.
AlphAI market briefEarnings
Primary signal
$SSD
Neutral
high confidence
Mentioned
$SSD
Relevance
7/10
AlphAI data visualization · based on SEC EDGAR 8-K
Decision brief

The 30-second read

$SSDNeutralHigh
01

Why it matters

The earnings beat and new capital return measures could provide short‑term support, but the modest growth and cost pressures temper expectations.

02

Market read

A standard earnings release with incremental guidance and a sizable buyback program; relevant for traders monitoring industrial stocks and capital allocation trends.

03

What to watch

Potential upside from the new $1B buyback if the market underestimates its long‑term support.

Relevance 7/10Novelty 8/10Timing: post‑market release
AlphAI · Earnings readSSD · 2026 Third Quarter · ended September 30, 2026

Simpson Manufacturing Co., Inc. Announces 2026 Third Quarter Financial Results and Updates 2026 Guidance

→Mixed quarter

Third-quarter net sales, operating income, net income and diluted EPS increased year-over-year, while consolidated gross margin, operating margin and Europe profitability declined. Management cited relatively flat global volumes, higher steel costs and tighter steel availability, while returning capital through repurchases, a new authorization and a dividend.

Revenue
$638M
2.3% y/y
North America, three months ended September 30, 2026
$502M
3.8% y/y

Key metrics

shortened, hover for the filing’s print
MetricValueq/qy/y
Net sales, three months ended September 30, 2026GAAP$638.1M–2.3%
Cost of sales, three months ended September 30, 2026GAAP346,547––
Gross profit, three months ended September 30, 2026GAAP291,583–1.4%
Gross profit margin, three months ended September 30, 2026GAAP45.7 %––
Research and development and engineering expense, three months ended September 30, 2026GAAP18,907––
Selling expense, three months ended September 30, 2026GAAP54,928––
General and administrative expense, three months ended September 30, 2026GAAP76,663––
Total operating expenses, three months ended September 30, 2026GAAP150,498–(6.3)%
Acquisition and integration related costs, three months ended September 30, 2026GAAP141––
Net gain on disposal of assets, three months ended September 30, 2026GAAP(65)––
Income from operations, three months ended September 30, 2026GAAP141,009–0.2%
Operating income margin, three months ended September 30, 2026GAAP22.1 %––
Interest income and other finance costs, net, three months ended September 30, 2026GAAP4,665––
Other & foreign exchange loss, net, three months ended September 30, 2026GAAP679––
Income before taxes, three months ended September 30, 2026GAAP146,353––
Provision for income taxes, three months ended September 30, 2026GAAP37,229––
Net income, three months ended September 30, 2026GAAP$109.1M–1.6%
Basic earnings per common share, three months ended September 30, 2026GAAP$ 2.69––
Diluted earnings per common share, three months ended September 30, 2026GAAP$ 2.68–3.9%
Weighted average shares outstanding, basic, three months ended September 30, 2026GAAP40,612––
Weighted average shares outstanding, diluted, three months ended September 30, 2026GAAP40,738––
Cash dividends declared per common share, three months ended September 30, 2026GAAP$ 0.30––
Depreciation and amortization, three months ended September 30, 2026GAAP$26.04M––
Pre-tax equity-based compensation expense, three months ended September 30, 2026GAAP$6.91M––
Adjusted EBITDA, three months ended September 30, 2026non-GAAP$167.2M–7.4%
Net sales, nine months ended September 30, 2026GAAP$1.90B–5.8%
Gross profit, nine months ended September 30, 2026GAAP875,667–5.4%
Gross profit margin, nine months ended September 30, 2026GAAP46.2 %––
Total operating expenses, nine months ended September 30, 2026GAAP455,574–(1.3)%
Income from operations, nine months ended September 30, 2026GAAP424,756–10.8%
Operating income margin, nine months ended September 30, 2026GAAP22.4 %––
Net income, nine months ended September 30, 2026GAAP$324.4M–12.3%
Diluted earnings per common share, nine months ended September 30, 2026GAAP$ 7.90–14.7%
Adjusted EBITDA, nine months ended September 30, 2026non-GAAP$502.7M–14.8%
Total U.S. Housing starts, trailing twelve months ended September 30, 2026other1,344–(1.9) %

Segments

SegmentRevenueq/qy/y
North America, three months ended September 30, 2026Price increases and higher unit sales volumes.$502.0M–3.8%
Europe, three months ended September 30, 2026Decreased unit sales volumes, partly offset by unit price increases; net sales were negatively affected by approximately $1.6 million in foreign currency translation.$129.9M–(3.4)%
Asia/Pacific, three months ended September 30, 2026No driver provided.$6.29M–14.9%
Wood Construction, three months ended September 30, 2026No driver provided.$534.1M–1.8%
Concrete Construction, three months ended September 30, 2026No driver provided.$102.5M–4.8%
Other, three months ended September 30, 2026No driver provided.$1.54M–N/M
North America, nine months ended September 30, 2026No driver provided.$1.49B–6.4%
Europe, nine months ended September 30, 2026No driver provided.$394.4M–3.3%
Asia/Pacific, nine months ended September 30, 2026No driver provided.$16.58M–12.2%
Wood Construction, nine months ended September 30, 2026No driver provided.$1.60B–5.2%
Concrete Construction, nine months ended September 30, 2026No driver provided.$293.0M–8.6%
Other, nine months ended September 30, 2026No driver provided.$4.07M–N/M

Amounts quoted below without a unit are in thousands, as in the filing’s tables. Per-share figures are as printed.

full fiscal year ending December 31, 2026 outlook

  • Tax rate25.0% to 26.0%
  • NoteConsolidated operating margin is estimated to be in the range of 20.0% to 20.5%.
  • NoteThe operating margin range includes a projected gain of $11.0 million on the sale of vacant land.
  • NoteCapital expenditures are estimated to be in the range of $80.0 million to $90.0 million.

Capital returns

  • Repurchased 352,346 shares of common stock in the open market at an average price of $188.25 per share, for a total of $66.3 million, for the quarter ended September 30, 2026.
  • On October 22, 2026, the Board approved a new stock repurchase authorization of $1.0 billion, with no expiration date, superseding the prior $200.0 million authorization.
  • On October 22, 2026, the Board declared a quarterly cash dividend of $0.30 per share, estimated to be $12.1 million in aggregate.
  • The dividend will be payable on January 28, 2027, to stockholders of record on January 7, 2027.

What drove it

  • Net sales increased 2.3% year-over-year to $638.1 million, supported by pricing actions, while global volumes remained relatively flat.
  • North America sales increased due to price increases and higher unit sales volumes.
  • North America income from operations increased due to higher net sales and lower operating expense, including lower personnel costs, professional fees and bad debt reserve charges.
  • Concrete Construction net sales increased 4.8%, compared with 1.8% growth in Wood Construction.
  • Nine-month operating income increased 10.8% and nine-month Adjusted EBITDA increased 14.8%.

Concerns

  • Consolidated gross profit margin declined to 45.7 % from 46.1 % and operating income margin declined to 22.1 % from 22.6 %.
  • Europe net sales declined 3.4% due to decreased unit sales volumes, and were negatively affected by approximately $1.6 million in foreign currency translation.
  • Europe gross margin declined to 36.1 % from 37.9 % due to higher factory and tooling, labor, warehouse and freight costs as a percentage of net sales.
  • Management identified housing affordability pressures, higher steel costs and tighter steel availability as elements of a more challenging near-term operating environment.
  • The estimated $11.0 million net gain on disposal of land will be recognized in the fourth quarter rather than the third quarter.

What to watch

  • Fourth-quarter recognition of the projected gain of $11.0 million on the sale of vacant land.
  • The full-year consolidated operating margin outlook of 20.0% to 20.5%, which includes the projected land-sale gain.
  • Additional pricing actions expected in 2027 to address the evolving cost environment.
  • Europe unit sales volumes, foreign currency translation effects and gross-margin recovery.
  • Housing affordability pressures, steel costs and steel availability.

Balance sheet and cash flow

  • As of September 30, 2026, cash and cash equivalents totaled $491.3 million.
  • Total debt outstanding was $308.0 million under the Company's $900 million credit facility as of September 30, 2026.
  • Cash flow provided by operating activities was $173.3 million, increasing by $3.1 million from $170.2 million.
  • Cash flow used in investing activities was $13.2 million, decreasing by $2.8 million from $16.0 million.
  • Trade accounts receivable, net was 409,361 as of September 30, 2026.
  • Inventories were 511,886 as of September 30, 2026.
  • Total assets were $ 3,124,775 as of September 30, 2026.
  • Stockholders’ equity was 2,145,179 as of September 30, 2026.

Analysis

Simpson reported third-quarter net sales of $ 638,130, up 2.3%, with GAAP income from operations of 141,009, up 0.2%, and GAAP net income of $ 109,124, up 1.6%. Diluted EPS increased 3.9% to $ 2.68. Adjusted EBITDA increased 7.4% to $ 167,239. For the first nine months, net sales increased 5.8%, income from operations increased 10.8%, net income increased 12.3%, and Adjusted EBITDA increased 14.8%.

Growth was concentrated in North America, where quarterly sales increased 3.8% to $ 501,951 on price increases and higher unit volumes. North America income from operations increased 9.5% to $ 137,024 and operating margin improved to 27.3 % from 25.9 %. Europe sales fell 3.4% to $ 129,887 on lower unit volumes, partly offset by price increases, with approximately $1.6 million of negative foreign currency translation. Europe gross margin fell to 36.1 % from 37.9 %, and income from operations declined 5.0% to $ 15,316.

Consolidated margin performance was weaker in the quarter. Gross profit margin declined to 45.7 % from 46.1 %, while operating income margin declined to 22.1 % from 22.6 %, despite total operating expenses decreasing 6.3% to 150,498. Management attributed North America gross-margin pressure to higher material, labor and freight costs, and Europe pressure to higher factory and tooling, labor, warehouse and freight costs. Management also stated that global volumes remained relatively flat and cited higher steel costs and tighter steel availability.

Capital allocation remained active. The company repurchased $66.3 million of shares during the quarter and approved a new $1.0 billion authorization with no expiration date. The Board also declared a $0.30 per share quarterly cash dividend estimated at $12.1 million in aggregate. At September 30, 2026, cash and cash equivalents were $491.3 million and total debt outstanding was $308.0 million under the $900 million credit facility. Operating cash flow was $173.3 million, compared with $170.2 million.

The updated full-year outlook calls for consolidated operating margin of 20.0% to 20.5%, an effective tax rate of 25.0% to 26.0%, and capital expenditures of $80.0 million to $90.0 million. The operating-margin range includes a projected $11.0 million gain on the sale of vacant land, which moved from an expected third-quarter closing to the fourth quarter. Management expects additional pricing actions in 2027 as it addresses the evolving cost environment.

Management, verbatim

Our third quarter performance reflects the resilience of our business and continued progress against our key growth initiatives despite a challenging market environment.

Mike Olosky, President and Chief Executive Officer of Simpson Manufacturing Co., Inc.

Net sales increased 2.3% year-over-year to $638.1 million, supported by our pricing actions, while global volumes remained relatively flat.

Mike Olosky, President and Chief Executive Officer of Simpson Manufacturing Co., Inc.

Looking ahead, demand for our value-added solutions remains encouraging, although we are navigating a more challenging near-term operating environment characterized by housing affordability pressures, higher steel costs and tighter steel availability.

Mike Olosky, President and Chief Executive Officer of Simpson Manufacturing Co., Inc.

Not in the filing

stated, not guessed
  • Previous-release outlook was not provided, so comparison of actual results with prior guidance is unavailable.
  • Quarterly and nine-month free cash flow were not reported.
  • Sequential, or quarter-over-quarter, comparisons were not reported for the operating metrics.
  • Full-year revenue, gross-margin and operating-expense guidance were not reported.
  • A CFO commentary section was not provided.
  • Segment revenue drivers for Asia/Pacific and product groups were not provided.
  • The filing did not provide a reported effective tax rate for the third quarter or nine months.

AlphAI analysis generated from the company’s SEC earnings filing (Form 8-K Item 2.02, or Form 6-K for a foreign private issuer). Every figure was cross-checked against the filing text; consensus estimates, price targets and share-price reactions are not shown because they are not in the filing. AI-generated research, not investment advice.

Background

Simpson Manufacturing (NYSE: SSD) is a provider of engineered structural connectors and building solutions. The company filed an 8‑K announcing its Q3 2026 financial results and updates to its 2026 guidance.

Company-level read

Ticker impact

$SSDNeutralHigh confidence
Context

Simpson Manufacturing reported Q3 2026 results with modest sales growth, a $0.30 dividend, and a new $1B share repurchase authorization.

Expected impact

likely modest pressure as the market prices in the modest earnings beat and new buyback authorization.

Evidence & confidence

The company posted slight year‑over‑year improvements and announced a sizable repurchase program, which may support the stock but the incremental growth is limited.

Market effects

Provides a modest positive signal for the building‑products sector, showing resilience despite higher steel costs.

Limited to U.S. industrial and construction markets.

Minimal global impact; primarily a U.S. industrial stock update.

Counterpoint

The modest growth and higher input costs may limit upside, suggesting a wait‑and‑see approach.

Key entities

  • Mike Olosky

    President and CEO of Simpson Manufacturing, quoted on performance and outlook.

Every SSD earnings report

This story covers one filing. The ticker page keeps them all: each quarter's reported metrics with year-over-year and sequential comparisons, segments, guidance, and how the numbers landed against the company's own prior outlook.

Related articles

$SSDHighAI 8/10

Why Simpson (SSD) stock is trading up today

Simpson (SSD) stock rose 4.4% after reporting Q3 2026 net sales of $638.1M (+2.3% YoY), income from operations of $141.0M (+0.2% YoY), and EPS of $2.68 (+3.9% YoY). The company also announced a new $1.0B share repurchase program. Shares closed at $191.87, up 5.5% from the previous close.

$SSDHigh

Stephens cuts Simpson Manufacturing stock price target on margin pressure

Stephens reduced its price target on Simpson Manufacturing (NYSE:SSD) to $205 from $215, citing margin pressure from higher raw material and freight costs. The company beat Q3 earnings and revenue estimates but reported lower gross margins. SSD raised its full-year operating margin guidance and authorized a $1 billion share repurchase program. Management expects Q4 margins to be weaker due to higher steel costs and a softer housing backdrop in 2027.

$SSDHighAI 8/10

Simpson Manufacturing Co Inc (SSD) Q3 2026 Earnings Call Highlights: Pricing Power

Simpson Manufacturing (SSD) reported Q3 2026 net sales up 2.3% YoY to $638.1M, with adjusted EBITDA rising 7.4% to $167.2M. North America sales grew 3.8%, while Europe declined 3.4%. The company lowered full-year operating margin guidance to 20.0-20.5% due to cost pressures. The board approved a $1B share repurchase program. Steel cost inflation and softer demand in retail and Europe were noted challenges.

$SSDHighAI 8/10

SSD Q3 deep dive: pricing actions and cost controls support margins in uncertain market

Simpson (SSD) reported Q3 2026 revenue of $638.1M, up 2.3% YoY, and adjusted EPS of $2.68, beating estimates. Management cited pricing actions and cost controls for margin support. The company expects steel and freight cost pressures but aims to maintain 20% operating margins. European sales declined due to volume drops and currency effects. SSD trades at $181.80.

$SSDMed

Simpson Manufacturing (SSD) Q3 2026 Earnings Call Transcript

Simpson Manufacturing (SSD) reported Q3 2026 net sales of $638.1M, up 2.3% YoY, driven by pricing. Global volumes were flat, but North American sales rose 3.8%. Residential volumes grew slightly despite housing market softness, while commercial and OEM businesses saw high single to double-digit growth. European sales declined 3.4% YoY due to market conditions and currency effects. Gross margin fell 40 bps to 45.7% due to higher material and freight costs.