Velo3D Announces Third Quarter 2026 Financial Results

Velo3D, Inc. (VELO) filed an SEC Form 8-K — Results of Operations and Financial Condition. Exhibit 99.1 Velo3D Announces Third Quarter 2026 Financial Results • Revenue of $20.5 million, up 50% year-over-year • New bookings of $28.9 million • Gross margin of 26.5% • Cash and cash equivalents of $75.7 million as of September 30, 2026 • Reaffirms 2026 Revenue Guidance; Re

Event · Earnings
Also in this documentGuidance · reaffirm

Facts are quoted from the filing text and checked against it.

Original reporting
Published Nov 10, 2026, 9:05 PM UTC
Analysis
AlphAI AI DeskAI-generated
Added to AlphAI Nov 10, 2026, 9:11 PM UTC. Informational, not investment advice.
How this was made
AlphAI summarizes source reporting and applies a structured AI analysis for relevance, timing, sentiment and ticker impact. Always verify material claims with the original publisher.
AlphAI market briefEarnings
Primary signal
$VELO
Neutral
medium confidence
Mentioned
$VELO
Relevance
7/10
AlphAI data visualization · based on SEC EDGAR 8-K
Decision brief

The 30-second read

$VELONeutralMed
01

Why it matters

The earnings release provides fresh data on revenue growth, margin improvement, and capital‑expenditure reductions, which are the primary drivers for any near‑term price move.

02

Market read

Micro‑cap earnings with modest growth; limited broader market relevance.

03

What to watch

The new Livermore Production Campus could unlock larger capacity later, which the market may undervalue now.

Relevance 7/10Novelty 7/10Timing: after‑hours filing on Nov 10, 2026
AlphAI · Earnings readVELO · Q3 2026 · ended 2026-09-30

Velo3D Q3 2026 revenue rises approximately 50% to $20.5 million; FY2026 gross margin guidance revised and positive EBITDA timing moved to 2028

→Mixed quarter

Revenue grew about 50% year-over-year and bookings of $28.9 million exceeded quarterly revenue, with gross margin at 26.5% against 3.2%. However, GAAP net loss widened to $(16.7) million from $(11.2) million as operating expenses more than doubled, the company dropped its second-half gross margin expectation, and it pushed positive EBITDA into 2028. Results for the quarter are preliminary, and the company restated earlier 2026 periods for an inventory reserve error.

Revenue
$20.5M
approximately 50% y/y
3D Printer and parts
$18.8M
57.0% y/y
Gross margin · GAAP
26.5%
EPS · non-GAAP
($0.34)
FY 2026 (reaffirmed or revised as stated in the release) outlook
$65 million to $75 million (reaffirmed)
GM Sequential improvement in gross margin in the fourth quarter of 2026 (revised). The company is no longer providing its prior expectation of greater than 30% gross margin in the second half of 2026.

Key metrics

shortened, hover for the filing’s print
MetricValueq/qy/y
Total revenue, Q3 2026 (three months ended Sept 30)GAAP$20.5M–approximately 50%
3D Printer and parts revenue, Q3 2026GAAP$18.8M–57.0%
Support services revenue, Q3 2026GAAP$1.41M––
Other revenue, Q3 2026GAAP$207K––
Total cost of revenue, Q3 2026GAAP$15.03M––
Gross profit, Q3 2026GAAP$5.42M––
Gross margin, Q3 2026GAAP26.5%––
Research and development, Q3 2026GAAP$5.39M––
Selling and marketing, Q3 2026GAAP$3.18M––
General and administrative, Q3 2026GAAP$14.14M––
Total operating expenses, Q3 2026GAAP$22.7M––
Loss from operations, Q3 2026GAAP−$17.29M––
Interest expense, Q3 2026GAAP−$160K––
Net loss, Q3 2026GAAP($16.7) million––
Net loss per share, basic and diluted, Q3 2026GAAP($0.52)––
Non-GAAP net loss, Q3 2026non-GAAP($10.8) million––
Non-GAAP net loss per share, basic and diluted, Q3 2026non-GAAP($0.34)––
EBITDA, Q3 2026non-GAAP−$15.67M––
Adjusted EBITDA, Q3 2026non-GAAP($9.8) million––
Non-GAAP adjusted operating expenses, Q3 2026non-GAAP$17M––
New bookings, Q3 2026other$28.9M––
Backlog as of Sept 30, 2026other$40.1M––
Total revenue, nine months 2026 (nine months ended Sept 30)GAAP$54.93M––
3D Printer and parts revenue, nine months 2026GAAP$49.82M––
Gross profit (loss), nine months 2026GAAP$14.37M––
Total cost of revenue, nine months 2026GAAP$40.56M––
Research and development, nine months 2026GAAP$12.95M––
Selling and marketing, nine months 2026GAAP$7.75M––
General and administrative, nine months 2026GAAP$27.38M––
Total operating expenses, nine months 2026GAAP$48.07M––
Loss from operations, nine months 2026GAAP−$33.70M––
Interest expense, nine months 2026GAAP−$1.07M––
Net loss, nine months 2026GAAP−$33.61M––
Net loss per share, basic and diluted, nine months 2026GAAP$(1.16)––
Non-GAAP net loss, nine months 2026non-GAAP−$23.32M––
EBITDA, nine months 2026non-GAAP−$30.19M––
Adjusted EBITDA, nine months 2026non-GAAP−$19.90M––
Non-GAAP adjusted operating expenses, nine months 2026non-GAAP$38.74M––
Net cash used in operating activities, nine months 2026GAAP−$52.19M––
Purchase of property and equipment (capital expenditures), nine months 2026GAAP−$6.38M––
Net cash provided by financing activities, nine months 2026GAAP$98.63M––

Segments

SegmentRevenueq/qy/y
3D Printer and partsThe company attributes the increase to a higher number of 3D Printer systems sold, higher average selling prices and a more favorable product mix, as well as higher RPS revenue from higher production volume in the three months ended Sept 30, 2026.$18.8M–57.0%
Support servicesThe release prints the Q3 2026 and Q3 2025 figures ($1,411 thousand and $1,351 thousand) but gives no driver commentary for this line.$1.41M––
OtherThe release prints the Q3 2026 and Q3 2025 figures ($207 thousand and $296 thousand) but gives no driver commentary for this line.$207K––

FY 2026 (reaffirmed or revised as stated in the release) outlook

  • Revenue$65 million to $75 million (reaffirmed)
  • Gross marginSequential improvement in gross margin in the fourth quarter of 2026 (revised). The company is no longer providing its prior expectation of greater than 30% gross margin in the second half of 2026.
  • Operating expensesNon-GAAP adjusted operating expenses of $45 million to $55 million (reaffirmed)
  • NoteCapital expenditures of $10 million to $20 million, reduced from the prior expectation of $40 million to $50 million, primarily reflecting the shift of a substantial portion of planned capital expenditures into 2027
  • NotePositive net cash from operations and positive EBITDA in 2028, compared with the prior expectation of positive EBITDA in the second half of 2026

Capital returns

  • The filing does not report share repurchases or dividends for the period.
  • In April 2026 the company completed a firm commitment underwritten registered direct offering of 3,571,428 shares, with gross proceeds of approximately $50 million (approximately $46.6 million net of issuance costs).
  • During Q2 2026 the company raised gross proceeds of approximately $59.4 million under its at-the-market offering program (approximately $57.4 million net of issuance costs).
  • The company's ATM program is cited in the risk factors as a potential source of dilution to existing stockholders.

What drove it

  • The company attributes the 3D Printer and parts revenue increase to more systems sold, higher average selling prices, a more favorable product mix and higher RPS production volume.
  • The company states that gross profit and gross margin improved primarily due to higher average selling prices, a more favorable product mix, improved manufacturing efficiencies, higher production volumes that improved fixed-cost absorption, and a net release of excess and obsolete inventory reserves in the current period.
  • The company states that gross margin also benefited from a prospective refinement in the allocation of certain labor and overhead costs between cost of revenue and operating expenses, implemented in Q2 2026.
  • The company states that the net release of excess and obsolete inventory reserves reflects utilization in production of previously reserved inventory, partially offset by increases in reserves for other inventory.
  • The company states that operating expenses increased as it continued investing in people, technology and operational capabilities for the Livermore Production Campus, Forge 1.
  • The company states that Forge 1 has opened in phases and is not yet operating at scale, and that it expects Forge 1 to serve as its primary production and manufacturing center.

Concerns

  • GAAP net loss widened to $(16.7) million in Q3 2026 from $(11.2) million in Q3 2025, and GAAP net loss per share was $(0.52) against $(0.65).
  • Total operating expenses rose to $22.7 million from $10.4 million, with G&A up to $14,141 thousand from $5,907 thousand.
  • The company no longer provides its prior expectation of greater than 30% gross margin in the second half of 2026, and it guides only to sequential improvement in Q4 2026.
  • Positive EBITDA moved from the prior expectation of the second half of 2026 to 2028.
  • Q3 2026 results are described as a preliminary estimate that may be revised in the Form 10-Q.
  • The company revised previously issued unaudited results for Q1 2026 and for Q2 and six months 2026 to correct errors related to its excess and obsolete inventory reserve. The release says the revisions reduced the six-month 2026 net loss by approximately $1.6 million.
  • The release notes remaining material weaknesses in internal control over financial reporting.
  • Other noncurrent liabilities rose to $82,595 thousand from $8,570 thousand at Dec 31, 2025. The release does not explain this line.
  • The release identifies dependence on a limited number of customers for a significant portion of revenue, and the risk of operating Forge 1 below capacity given its fixed lease and operating costs.

What to watch

  • Whether Q4 2026 gross margin shows the sequential improvement the company guides to, and how it compares with the 26.5% achieved in Q3 2026.
  • Whether FY2026 revenue lands within $65 million to $75 million, given nine-month revenue of $54,930 thousand.
  • Whether non-GAAP adjusted operating expenses land within $45 million to $55 million, given nine-month non-GAAP adjusted operating expenses of $38,742 thousand.
  • Progress of Forge 1 toward full operation, and the timing of the $10 million to $20 million capital expenditure outlook shifting into 2027.
  • Conversion of the $28.9 million in Q3 bookings and $40.1 million backlog into revenue.
  • The Form 10-Q, including Note 2 on the revision, the going concern detail and the composition of other noncurrent liabilities and other assets.
  • Progress on remediation of the remaining material weaknesses in internal control over financial reporting.
  • Any further equity issuance under the at-the-market program, given the company's stated dilution risk.

Balance sheet and cash flow

  • Cash and cash equivalents: $75.7 million as of Sept 30, 2026, compared with $39.0 million as of Dec 31, 2025. The company attributes the increase primarily to net cash provided by financing activities of approximately $98.6 million in the first nine months of 2026, partially offset by approximately $52.2 million of cash used in operating activities and approximately $6.4 million of cash used in investing activities.
  • Total debt: $7.4 million as of Sept 30, 2026, compared with $31.0 million as of Dec 31, 2025. The company links the decrease to the conversion of convertible secured notes into common stock in March 2026, the repayment in full of the Secured Notes and scheduled repayments under the equipment loan.
  • Balance sheet at Sept 30, 2026 versus Dec 31, 2025: total assets $252,305 thousand versus $105,348 thousand; total stockholders' equity $137,303 thousand versus $38,156 thousand; other noncurrent liabilities $82,595 thousand versus $8,570 thousand; other assets $84,174 thousand versus $10,505 thousand.
  • Going concern: management concluded that there is no longer substantial doubt about the company's ability to continue as a going concern for the twelve months following issuance of its Q3 2026 financial statements. The release states that this assessment does not assume additional financing is required. Further information will be in the Form 10-Q.

Analysis

Velo3D reported preliminary Q3 2026 revenue of $20.5 million, up approximately 50% from $13.6 million, with 3D Printer and parts revenue up 57.0% to $18.8 million. The company attributes that growth to more systems sold, higher average selling prices, a more favorable mix and higher RPS production volume. New bookings were $28.9 million, above quarterly revenue, and backlog was $40.1 million at Sept 30, 2026. The release does not print a prior-year bookings or backlog figure, so no comparison is made for either.

Gross margin was 26.5% against 3.2% a year earlier, and gross profit was $5,418 thousand against $433 thousand. The company attributes the improvement to pricing, mix, absorption of fixed manufacturing costs, a net release of excess and obsolete inventory reserves, and a prospective reallocation of certain labor and overhead costs between cost of revenue and operating expenses implemented in Q2 2026. Each of these is presented as the company's own explanation. The quarter's gross margin therefore includes a reserve release and a cost reclassification, and the release does not separate their size.

Operating expenses rose to $22.7 million from $10.4 million. G&A rose to $14,141 thousand from $5,907 thousand, R&D to $5,387 thousand from $2,722 thousand, and selling and marketing to $3,178 thousand from $1,797 thousand. GAAP net loss was $(16.7) million, or $(0.52) per share, against $(11.2) million, or $(0.65), a year earlier. Non-GAAP net loss was $(10.8) million, or $(0.34) per share, and adjusted EBITDA was $(9.8) million. The company states that the opex increase reflects investment in Forge 1, which it describes as not yet operating at scale.

On the balance sheet, cash rose to $75.7 million from $39.0 million at Dec 31, 2025, and total debt fell to $7.4 million from $31.0 million. Cash was supported by roughly $98.6 million of financing inflows in the first nine months, including the April 2026 registered direct offering and ATM sales, against $52.2 million of operating cash outflow. Nine-month operating cash outflow was $(52,193) thousand against $(19,590) thousand a year earlier. Management concluded that substantial doubt about going concern no longer exists. Other noncurrent liabilities increased to $82,595 thousand from $8,570 thousand, and the release does not explain that line.

The guidance picture is mixed. Revenue guidance of $65 million to $75 million and non-GAAP adjusted operating expense guidance of $45 million to $55 million were reaffirmed. The company revised FY2026 gross margin guidance, dropping the prior expectation of greater than 30% in the second half and guiding only to sequential improvement in Q4, and lowered FY2026 capital expenditure guidance to $10 million to $20 million from $40 million to $50 million, citing a shift of capex into 2027. Positive EBITDA moved from the prior expectation of the second half of 2026 to 2028. The release also revises earlier 2026 results for an inventory reserve error, reducing the six-month net loss by approximately $1.6 million, and states that the Q3 figures are preliminary pending the Form 10-Q.

Management, verbatim

We delivered solid third quarter results, with revenue increasing approximately 50% year-over-year to $20.5 million and new bookings reaching $28.9 million, exceeding revenue for the quarter.

Arun Jeldi, Chief Executive Officer

While a substantial portion of our planned capital expenditures is shifting into 2027, we believe these investments in infrastructure, talent and manufacturing capabilities are essential to scaling our operations, strengthening execution and building the foundation for sustainable, profitable growth.

Arun Jeldi, Chief Executive Officer

Not in the filing

stated, not guessed
  • Prior-year and prior-quarter figures for bookings and backlog were not printed.
  • Year-over-year percentage changes for support services revenue, other revenue, cost of revenue, gross profit, operating expense lines, net loss and EPS were not printed.
  • The change in gross margin in percentage points was not printed.
  • Prior-quarter (Q2 2026) figures were not printed; the release gives only Q3 2026, Q3 2025, nine months 2026 and nine months 2025.
  • Nine-month gross margin percentage was not printed.
  • Nine-month non-GAAP net loss per share was not printed.
  • Cash at Dec 31, 2025 is printed in the narrative ($39.0 million) but is not a prior-year figure for the Q3 2025 comparison; no Q3 2025 balance sheet was provided.
  • Composition of other noncurrent liabilities and other assets was not provided.
  • Driver commentary for support services and other revenue was not provided.
  • Consensus estimates and share price reaction were not provided.
  • Form 10-Q detail, including Note 2 on the revision of prior periods, is referenced but not included.
  • The previous outlook covered the full year 2026 only, and this quarterly release reports Q3 2026, so there is nothing to compare.

Written by an AI language model from the company’s SEC earnings filing (Form 8-K Item 2.02, or Form 6-K for a foreign private issuer). Every figure is checked against the filing text, and a metric the filing does not print, or whose value, prior period and change do not add up, is dropped from the metrics. Guided figures in the outlook comparison come from the company’s previous release. The model can still misread a table, in the metrics or in the text, so check a number in the filing before you rely on it. Consensus estimates, price targets and share-price reactions are not shown because they are not in the filing. AI-generated research, not investment advice.

Background

Velo3D is a Nasdaq‑listed metal additive manufacturing company serving aerospace and defense customers. The filing includes detailed financials and operational updates.

Company-level read

Ticker impact

$VELONeutralMedium confidence
Context

Velo3D filed its Q3 2026 earnings, reporting $20.5M revenue and reaffirming 2026 revenue guidance while revising margin and capex guidance.

Expected impact

likely modest pressure as investors digest lower capex guidance and unchanged revenue outlook

Evidence & confidence

The company is a micro‑cap; the earnings numbers are new but modest in scale, and the guidance is largely unchanged, so price reaction is expected to be limited.

Market effects

Adds a data point for the metal additive manufacturing niche, but unlikely to shift sector sentiment.

Limited to U.S. small‑cap investors tracking industrial tech.

Minimal global impact.

Counterpoint

The reaffirmed revenue guidance may be seen as a sign of limited growth potential, suggesting a short‑term pullback.

Key entities

  • Arun Jeldi

    Chief Executive Officer of Velo3D, quoted in the filing.

Every VELO earnings report

This story covers one filing. The ticker page keeps them all: each quarter's reported metrics with year-over-year and sequential comparisons, segments, guidance, and how the numbers landed against the company's own prior outlook.

Related articles

$VELOHigh

Needham lowers Velo3D stock price target on profitability delay

Needham cut Velo3D's (VELO) price target to $12 from $33, citing delayed profitability. Q3 2026 revenue of $20.5M beat estimates, but adjusted EBITDA loss of $9.8M missed forecasts. Management pushed positive EBITDA to 2028. Gross margin is 0.54%, and cash burn is high. Bookings reached $28.9M, backlog $40.1M. InvestingPro rates financial health as 'WEAK' but notes undervaluation.

$VELOMedAI 8/10

Velo3D Inc (VELO) (Q3 2026) Earnings Call Highlights: Revenue Surges 50% as Margins Expand

Velo3D (VELO) reported Q3 2026 revenue of $20.5M, up 50% YoY, with gross margin expanding to 26.5%. New bookings were $28.9M, and cash increased to $75.7M. However, operating expenses rose to $22.7M, resulting in a GAAP net loss of $16.7M. Full-year revenue guidance is $65-75M, with profitability delayed to 2028. The company plans to install 40 printers in 2027 and is exploring funding options.

$VELOMed

Velo3D (VELO) Q3 2026 Earnings Call Transcript

Velo3D reported Q3 2026 gross margin of 26.5%, up from 3.2% YoY, driven by higher prices, better product mix, and increased production. Operating expenses rose due to investments in the Livermore production campus. Cash increased to $75.7M, and debt fell to $7.4M, removing going concern doubts. The company plans to shift some 2026 capex to 2027. Forge 1 campus is being scaled up to support aerospace, defense, and energy customers.

$VELOLow

Velo3D, Inc. (VELO): Company plans to report final financial results for Q3 2026 the week of November 9, 2026

Velo3D, Inc. (VELO) filed an SEC Form 8-K — Results of Operations and Financial Condition. Exhibit 99.1 Velo3D Announces Preliminary Third Quarter 2026 Revenue of Approximately $19.5 Million to $20.5 Million, Representing Year-over-Year Growth of Approximately 43% to 51% Company plans to report final financial results for Q3 2026 the week of November 9, 2026 FREMONT, C